When the SNAPPI fastener is not in use, fold the loop over the back of the SNAPPI end to fit over the teeth of the white grip - (see photo above). This acts as a barrier and prevents the sharp teeth from being exposed. These loops are not to be pulled on when attaching the SNAPPI fastener to the diapers. When attaching the SNAPPI, hold on to the solid part of the tab. NOTE: Keep all SNAPPI fasteners out of children's reach when not in use.

Benefits of the SNAPPI DIAPER FASTENER:

~ SAFER THAN PINS - no more pinpricks for baby or parent!!

~ RELIABLE - a snug fitting diaper to prevent those dreaded leaks.

~ DURABLE - no snaps that can become brittle/rust, nor any velcro to catch all the fluff in the wash.

~ ECONOMICAL - inexpensive and saves parents who wish to cloth diaper from having to purchase expensive diapers as they can be used on flat or prefold cloth diapers

~ HYGIENIC and EASY to use - allows first time parents, grandparents and people with arthritic problems to cloth diaper with ease. It is as easy as 1 - 2 - 3 This unique product was invented by a father who experienced frustration changing his own child's diapers. A snap solution to easier cloth diapering!

DIRECTIONS FOR USE:

SNAPPI fasteners must be used responsibly, and need to be used correctly to work effectively.

1. STRETCH the Snappi fastener before its first use. The stretching triggers the 'memory' of the Snappi to return to its original size and in so doing, pulls the diaper together to the middle to allow for a snug fit. This is essential for the Snappi to work properly. This can be done by holding the Snappi in the center with one hand and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. follow this stretching procedure with each leg. The Snappi is now ready to go!

2. Make sure that the Snappi is ATTACHED SECURELY. It is important that the Snappi 'leg' being attached be stretched across the diaper before hooking it into the diaper. When attaching the Snappi, hold onto the solid part of the tab. DO NOT pull on the loops. Hook Left, Stretch ACROSS and Hook Right Stretch DOWN and Hook Center. In other words, the SNAPPI fastener should go from a 'T' shape to a 'Y' shape! By following these instructions, the Snappi should be secure and the diaper will fit snugly. ALWAYS place a cover over the diaper and Snappi fastener. SNAPPI works best with terry cloth diapers, cotton prefolds and other cloth diapers with a loose enough weave for the SNAPPI to hook into. They DO NOT work well with flannel or any other tightly woven diapers, even some hemp diapers.

WARNING:

1. Always use a cover when using a SNAPPI fastener with your baby's diaper.

2. Keep out of children's reach when not in use!

3. Do not use a SNAPPI fastener on toddlers that have the ability to undo their cover and take off their diaper and/or clothes.

4. Do not use your SNAPPI for longer than 6 months.

5. Do not leave your SNAPPI lying in the sun as it is not UV resistant and can reduce the effectiveness of the SNAPPI.

CARE:

Clean your SNAPPI in hot, soapy water. Do not launder them with diapers in the washer as this may weaken the grip attachment.

CAUTION:

Any tear in the SNAPPI can lead to separation of a piece, presenting a possible choking hazard. Do not cut your SNAPPI as this could create weak spots in your SNAPPI. Do not pull on the side strips of the SNAPPI when attaching it, as this can cause them to break. These strips serve as a safety feature only, as mentioned above. Use the flat tabs for leverage. Inspect your SNAPPI before each use and discontinue use immediately if there is any sign of cracking, tearing, breakage or wear of the teeth or any other parts. The SNAPPI fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane. It is made in South Africa.